User manual

Remote Control
R&S
®
RTO
588User Manual 1316.0827.02 ─ 06
Parameters:
<Suppression> ON | OFF
*RST: OFF
Usage: SCPI confirmed
CALCulate:MATH<m>:FFT:PHASe:THReshold <SupprThres>
Defines the minimum frequency magnitude for which phases are calculated. This setting
is only available if CALCulate:MATH<m>:FFT:PHASe:SUPPression is set to "ON".
Suffix:
<m>
.
1...4
math waveform
Parameters:
<SupprThres> Range: -180 to 180
Increment: 0.1
*RST: 0
Default unit: dBm
Usage: SCPI confirmed
CALCulate:MATH<m>:FFT:PHASe:UNWRap <Unwrap>
If enabled, phase shifts due to a limitation of the value range are eliminated.
Suffix:
<m>
.
1...4
math waveform
Parameters:
<Unwrap> ON | OFF
*RST: OFF
Usage: SCPI confirmed
16.2.10.3 Waveform Data
CALCulate:MATH<m>:DATA:STYPe...............................................................................588
CALCulate:MATH<m>:DATA:HEADer..............................................................................589
CALCulate:MATH<m>:DATA[:VALues]............................................................................589
CALCulate:MATH<m>:DATA:STYPe?
Returns the signal type of the source of the math waveform.
Suffix:
<m>
.
1..4
Selects the math waveform.
Command Reference