User manual

Remote Control
R&S
®
RTO
572User Manual 1316.0827.02 ─ 06
16.2.9.11 Gating
MEASurement<m>:GATE[:STATe]..................................................................................572
MEASurement<m>:GATE:MODE....................................................................................572
MEASurement<m>:GATE:ABSolute:STARt......................................................................572
MEASurement<m>:GATE:ABSolute:STOP.......................................................................572
MEASurement<m>:GATE:RELative:STARt.......................................................................573
MEASurement<m>:GATE:RELative:STOP.......................................................................573
MEASurement<m>:GATE:NOISe....................................................................................573
MEASurement<m>:GATE:SHOW....................................................................................573
MEASurement<m>:GATE:ZCOupling...............................................................................573
MEASurement<m>:GATE[:STATe] <State>
Considers the gating settings of the source waveform for the measurement.
Suffix:
<m>
.
1..9
See "Measurement selection: MEASurement<m>" on page 522.
Parameters:
<State> ON | OFF
*RST: OFF
MEASurement<m>:GATE:MODE <Mode>
Defines whether the gate settings are configured using absolute or relative values.
Suffix:
<m>
.
1..9
See "Measurement selection: MEASurement<m>" on page 522.
Parameters:
<Mode> ABS | REL
*RST: ABS
MEASurement<m>:GATE:ABSolute:STARt <Time>
MEASurement<m>:GATE:ABSolute:STOP <Time>
Define the absolute start and end values for the gate.
Suffix:
<m>
.
1..9
See "Measurement selection: MEASurement<m>" on page 522.
Parameters:
<Time> Range: -100E+24 to 100E+24
Increment: 0.01
*RST: 0.01
Usage: SCPI confirmed
Command Reference