User manual

Remote Control
R&S
®
RTO
561User Manual 1316.0827.02 ─ 06
Meas.
suffix
<MeasType>
parameter value
Meas. type Description/Result
4 HPEak Histogram peak Maximum sample value in the histogram
5 PEAK Peak value Signal value at the histogram peak
6 UPEakvalue Upper peak value Signal value at the maximum sample value in the
upper half of the histogram
7 LPEakvalue Lower peak value Signal value at the maximum sample value in the
lower half of the histogram
8 HMAXimum Maximum Highest signal value with a probability > 0
9 HMINimum Minimum Lowest signal value with a probability > 0
10 MEDian Median Signal value for which half the samples lie above, the
other half below in the histogram
11 MAXMin Max - Min Range of signal values with a probability > 0
12 HMEan Mean Weighted arithmetic average of the histogram
13 HSTDdev σ (S-dev) Standard deviation of the sample numbers
14 M1STddev Mean ±σ Range between (mean value + standard deviation)
and (mean value - standard deviation)
15 M2STddev Mean ±2*σ Range between (mean value + 3 * standard deviation)
and (mean value - 2 * standard deviation)
16 M3STddev Mean ±3*σ Range between (mean value + 3 * standard deviation)
and (mean value - 2 * standard deviation)
17 MKPositive Marker + Probability
%
Marker value (according to the selected probability
domain marker type) plus the defined limit.
Note that the value is restricted to the histogram
range.
18 MKNegative Marker - Probability
%
Marker value (according to the selected probability
domain marker type) minus the defined limit.
Note that the value is restricted to the histogram
range.
MEASurement<m>:HISTogram:SELect............................................................................561
MEASurement<m>:HISTogram:PROBability:TYPE............................................................562
MEASurement<m>:HISTogram:PROBability:LIMit.............................................................562
MEASurement<m>:HISTogram:LCHeck<n>:VALid............................................................563
MEASurement<m>:HISTogram:LCHeck<n>:LOWer:LIMit..................................................563
MEASurement<m>:HISTogram:LCHeck<n>:UPPer:LIMit...................................................563
MEASurement<m>:HISTogram:LCHeck<n>:LOWer:MARGin.............................................564
MEASurement<m>:HISTogram:LCHeck<n>:UPPer:MARGin..............................................564
MEASurement<m>:HISTogram:SELect <HistogramName>
Selects the histogram on which the measurement is based.
Command Reference