User manual

Remote Control
R&S
®
RTO
560User Manual 1316.0827.02 ─ 06
LAYout:HISTogram:VERTical:RELative:STOP <HistogramName>,<RelativeStop>
LAYout:HISTogram:VERTical:RELative:STOP? <HistogramName>
Defines the vertical stop value of the histogram.
Parameters:
<RelativeStop> Range: -100E+24 to 100E+24
Increment: 0.1
*RST: 100
Default unit: %
Parameters for setting and query:
<HistogramName>
Usage: SCPI confirmed
LAYout:
HISTogram:RESet <HistogramName>
Resets the values to begin a new histogram.
Setting parameters:
<HistogramName>
Usage: Setting only
SCPI confirmed
LAYout:HISTogram:REMove <Name>
Removes the specified histogram.
Setting parameters:
<Name>
Usage: Setting only
SCPI confirmed
Histogram Measurement
The following table lists the measurement suffixes and the <MeasType> parameter value
with a short description.
For a detailed description, see chapter 5.2.1.4, "Histograms", on page 138.
Table 16-17: Histogram measurement types
Meas.
suffix
<MeasType>
parameter value
Meas. type Description/Result
1 WCOunt Waveform count Number of acquisitions (waveforms) the histogram is
based on
2 WSAMples Waveform samples Number of samples from the most recent acquisition
included in the current histogram
3 HSAMples Histogram samples Number of samples from all acquisitions included in
the current histogram
Command Reference