User manual

Remote Control
R&S
®
RTO
540User Manual 1316.0827.02 ─ 06
Results
MEASurement<m>:REFLevel:RESult:LOWer...................................................................540
MEASurement<m>:REFLevel:RESult:MIDDle...................................................................540
MEASurement<m>:REFLevel:RESult:UPPer....................................................................540
MEASurement<m>:REFLevel:RESult:SIGLow..................................................................540
MEASurement<m>:REFLevel:RESult:SIGHigh.................................................................540
MEASurement<m>:REFLevel:RESult:BINNer...................................................................540
MEASurement<m>:REFLevel:RESult:BOUTer..................................................................541
MEASurement<m>:REFLevel:RESult:TINNer...................................................................541
MEASurement<m>:REFLevel:RESult:TOUTer..................................................................541
MEASurement<m>:REFLevel:RESult:LOWer?
MEASurement<m>:REFLevel:RESult:MIDDle?
MEASurement<m>:REFLevel:RESult:UPPer?
Return the lower, middle, and upper reference level, respectively.
Suffix:
<m>
.
1..9
See "Measurement selection: MEASurement<m>" on page 522.
Return values:
<Level> Range: -100E+24 to 100E+24
Increment: 0
*RST: 0
Usage: Query only
SCPI confirmed
MEASurement<m>:REFLevel:RESult:SIGLow?
MEASurement<m>:REFLevel:RESult:SIGHigh?
Return the signal value that represents a low or high level, respectively.
Suffix:
<m>
.
1..9
See "Measurement selection: MEASurement<m>" on page 522.
Return values:
<Level> Range: -100E+24 to 100E+24
Increment: 0
*RST: 0
Usage: Query only
SCPI confirmed
MEASurement<m>:REFLevel:RESult:BINNer?
Returns the area above the low signal level which is still considered to be low level.
Command Reference