User manual

Remote Control
R&S
®
RTO
538User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
2...21
Source waveform, see chapter 16.2.2.1, "Waveform Suf-
fix", on page 419.
Parameters:
<RelOuterDist> Range: 0 to 100
Increment: 1
*RST: 10
Default unit: %
Usage: SCPI confirmed
REFLevel<m>:RELative:ITUBe <RelativeInnDist>
Defines a percentage of the signal level by which the absolute signal level may be higher
than the low signal level or lower than the high signal level to be considered low or high,
respectively.
Suffix:
<m>
.
2...21
Source waveform, see chapter 16.2.2.1, "Waveform Suf-
fix", on page 419.
Parameters:
<RelativeInnDist> Range: 0 to 50
Increment: 1
*RST: 0
Default unit: %
Usage: SCPI confirmed
REFLevel<m>:ABSolute:TOTube <TopOuterDist>
Defines an area above the high signal level which is still considered to be high level.
Suffix:
<m>
.
2...21
Source waveform, see chapter 16.2.2.1, "Waveform Suf-
fix", on page 419.
Parameters:
<TopOuterDist> Range: 0 to 100E+24
Increment: 1E-3
*RST: 0
Default unit: V
Usage: SCPI confirmed
Command Reference