User manual

Remote Control
R&S
®
RTO
536User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
2...21
Source waveform, see chapter 16.2.2.1, "Waveform Suf-
fix", on page 419.
Parameters:
<UppRefLevRel> Percentage of the high signal level.
Range: 0 to 100
Increment: 1
*RST: 90
Default unit: %
Example:
REFLevel8:RELative:LOWer 85
Sets the upper reference level for Channel3/Waveform1 to 85 %.
C3W1 corresponds to suffix number 8.
See also: example "Manual reference level definition using relative
values" on page 528
Usage: SCPI confirmed
REFLevel<m>:RELative:MIDDle <MiddleRefLevRel>
Sets the middle relative reference level if REFLevel<m>:RELative:MODE is set to
USER.
Suffix:
<m>
.
2...21
Source waveform, see chapter 16.2.2.1, "Waveform Suf-
fix", on page 419.
Parameters:
<MiddleRefLevRel> Percentage of the high signal level.
Range: 0 to 100
Increment: 1
*RST: 50
Default unit: %
Example:
REFLevel8:RELative:MIDDle 50
Sets the middle reference level for Channel3/Waveform1 to 50 %.
C3W1 corresponds to suffix number 8.
See also: example "Manual reference level definition using relative
values" on page 528
Usage: SCPI confirmed
REFLevel<m>:RELative:LOWer <LowRefLevRel>
Sets the lower relative reference level if REFLevel<m>:RELative:MODE is set to
USER.
Command Reference