User manual
Remote Control
R&S
®
RTO
534User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
2...21
Source waveform, see chapter 16.2.2.1, "Waveform Suf-
fix", on page 419.
Parameters:
<BottomDistance> Range: 0 to 100E+24
Increment: 1E-3
*RST: 0
Default unit: V
Example:
REFLevel2:ABSolute:BDIStance 0.0002
Sets the bottom distance for Channel1/Waveform1 to 0.2 mV.
C1W1 corresponds to suffix number 2.
See also: example "Manual reference level definition using abso-
lute values" on page 527
Usage: SCPI confirmed
User Reference Level
REFLevel<m>:ABSolute:ULEVel.....................................................................................534
REFLevel<m>:ABSolute:MLEVel.....................................................................................535
REFLevel<m>:ABSolute:LLEVel......................................................................................535
REFLevel<m>:RELative:UPPer.......................................................................................535
REFLevel<m>:RELative:MIDDle......................................................................................536
REFLevel<m>:RELative:LOWer......................................................................................536
REFLevel<m>:ABSolute:ULEVel <UpperLevel>
The upper reference level, required e.g. to determine a rise.
Suffix:
<m>
.
2...21
Source waveform, see chapter 16.2.2.1, "Waveform Suf-
fix", on page 419.
Parameters:
<UpperLevel> Range: -100E+24 to 100E+24
Increment: 1E-3
*RST: 0
Default unit: V
Example:
REFLevel2:ABSolute:ULEVel 0.01
Sets the upper reference level for Channel1/Waveform1 to 10 mV.
C1W1 corresponds to suffix number 2.
See also: example "Manual reference level definition using abso-
lute values" on page 527
Usage: SCPI confirmed
Command Reference