User manual

Acquisition and Setup
R&S
®
RTO
38User Manual 1316.0827.02 ─ 06
Show history
Enables the history mode and displays the history viewing functions in the "Ultra Seg-
mentation" tab. For details, see chapter 4.4.3.1, "Viewer", on page 118.
2.3.2 Vertical Settings
The "Vertical" menu contains all channel-dependent settings and information.
● Channels.................................................................................................................38
● Power Calculation...................................................................................................40
● Coupled Channels...................................................................................................41
2.3.2.1 Channels
The "Channels" tab provides all basic vertical settings. The channels are listed in vertical
tabs at the left side of the dialog box.
Make sure that the correct channel tab is selected. The vertical rotary knobs are illumi-
nated in the color of the selected channel.
Show channel
Switches the channel signal on or off. The signal icon appears on the signal bar. The
waveform of the last acquisition is displayed in the diagram.
SCPI command:
CHANnel<m>:STATe on page 436
Ground
Connects the input to the ground.
GND
Reference for Acquisition and Setup