User manual

Remote Control
R&S
®
RTO
518User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
1..4
Selects the cursor.
Parameters:
<Coupling> ON | OFF
ON
Moving one cursor line moves the other cursor line too. The cursor
lines always remain a fixed distance.
OFF
Each cursor line is positioned independently.
*RST: OFF
CURSor<m>:Y1Position <YPosition1>
Defines the position of the lower horizontal cursor line.
Suffix:
<m>
.
1..4
Cursor measurement
Parameters:
<YPosition1> Range: -50 to 50
Increment: 0.01
*RST: 0
CURSor<m>:Y2Position <YPosition2>
Defines the position of the upper horizontal cursor line.
Suffix:
<m>
.
1..4
Cursor measurement
Parameters:
<YPosition2> Range: -50 to 50
Increment: 0.01
*RST: 0
CURSor<m>:YCOupling <Coupling>
Defines the positioning mode of the horizontal cursor. If the horizontal cursor lines track
the waveform, the y-coupling is irrelevant (CURSor<m>:MODE TRACk).
Suffix:
<m>
.
1..4
Selects the cursor.
Command Reference