User manual

Remote Control
R&S
®
RTO
517User Manual 1316.0827.02 ─ 06
CURSor<m>:SOURce <CursorSource>
Defines the source of the cursor measurement.
Suffix:
<m>
.
1..4
Selects the cursor.
Parameters:
<CursorSource> NONE | C1W1 | C1W2 | C1W3 | C2W1 | C2W2 | C2W3 | C3W1 |
C3W2 | C3W3 | C4W1 | C4W2 | C4W3 | M1 | M2 | M3 | M4 | R1 |
R2 | R3 | R4 | XY1 | XY2 | XY3 | XY4 | D0 | D1 | D2 | D3 | D4 | D5 |
D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15 | MSOB1 |
MSOB2 | MSOB3 | MSOB4
Source of the cursor measurement, see chapter 16.2.2.2, "Wave-
form Parameter", on page 419
*RST: NONE
CURSor<m>:X1Position <XPosition1>
Defines the position of the left vertical cursor line.
Suffix:
<m>
.
1..4
Selects the cursor.
Parameters:
<XPosition1> Range: 0 to 500
Increment: 0.1
*RST: 0
CURSor<m>:X2Position <XPosition2>
Defines the position of the right vertical cursor line.
Suffix:
<m>
.
1..4
Selects the cursor.
Parameters:
<XPosition2> Range: 0 to 500
Increment: 0.1
*RST: 0
Default unit: s
CURSor<m>:XCOupling <Coupling>
Defines the positioning mode of the vertical cursor.
Command Reference