User manual

Remote Control
R&S
®
RTO
516User Manual 1316.0827.02 ─ 06
CURSor<m>:AOFF
This command switches all cursors off.
Suffix:
<m>
.
1..4
The numeric suffix is ignored.
Usage: Event
CURSor<m>:STATe <State>
Switches the indicated cursor on or off.
Suffix:
<m>
.
1..4
Selects the cursor.
Parameters:
<State> ON | OFF
*RST: OFF
CURSor<m>:FUNCtion <Type>
Defines the type of the indicated cursor.
Suffix:
<m>
.
1..4
Selects the cursor.
Parameters:
<Type> HORizontal | VERTical | PAIRed
HORizontal
A pair of horizontal cursor lines.
VERTical
A pair of vertical cursor lines.
PAIRed
Both vertical and horizontal cursor line pairs.
*RST: PAIRed
CURSor<m>:TRACking[:STATe] <TrackCurve>
If set to ON, the horizontal cursor lines follow the waveform.
Suffix:
<m>
.
1..4
Selects the cursor.
Parameters:
<TrackCurve> ON | OFF
*RST: OFF
Command Reference