User manual

Remote Control
R&S
®
RTO
514User Manual 1316.0827.02 ─ 06
<n> 1..3
Selects the waveform. For each channel, up to three waveforms
can be analyzed. If WAVeform<n> is omitted, waveform 1 is
adressed.
Parameters:
<AutoRepeat> ON | OFF
*RST: OFF
Usage: Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSDate?
Returns the date of the current acquisition that is shown in the history viewer (
CHANnel<m>[:WAVeform<n>]:HISTory:CURRent).
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. For each channel, up to three waveforms
can be analyzed. If WAVeform<n> is omitted, waveform 1 is
addressed.
Return values:
<DateAbsString> String with date of the current acquisition (absolute time)
Usage: Query only
CHANnel<m>[:WAVeform<n>]:HISTory:TSABsolute?
Returns the abolsute daytime of the current acquisition that is shown in the history viewer
(CHANnel<m>[:WAVeform<n>]:HISTory:CURRent).
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. For each channel, up to three waveforms
can be analyzed. If WAVeform<n> is omitted, waveform 1 is
addressed.
Return values:
<TimeAbsolute> Range: 0 to 0
Increment: 1
*RST: 0
Usage: Query only
Command Reference