User manual

Remote Control
R&S
®
RTO
512User Manual 1316.0827.02 ─ 06
If a replay is running, the query returns the number of the currently shown acquisition.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. For each channel, up to three waveforms
can be analyzed. If WAVeform<n> is omitted, waveform 1 is
adressed.
Parameters:
<CurrAcqIdx> Range: 0 to 0
Increment: 1
*RST: 0
CHANnel<m>[:
WAVeform<n>]:HISTory:STARt <StartAcqIdx>
Sets the start point for the history replay.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. For each channel, up to three waveforms
can be analyzed. If WAVeform<n> is omitted, waveform 1 is
adressed.
Parameters:
<StartAcqIdx> The start index is always negative.
Range: 0 to 0
Increment: 1
*RST: 0
CHANnel<m>[:WAVeform<n>]:HISTory:STOP <StopAcqIdx>
Sets the end point for the history viewer.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. For each channel, up to three waveforms
can be analyzed. If WAVeform<n> is omitted, waveform 1 is
adressed.
Command Reference