User manual

Remote Control
R&S
®
RTO
509User Manual 1316.0827.02 ─ 06
Parameters:
<RelativeStop> Range: -100E+24 to 100E+24
Increment: 0.1
*RST: 100
Default unit: %
Parameters for setting and query:
<DiagramName> Name of the diagram on which the zoom area is based.
<ZoomName> Name of the zoom diagram
LAYout:ZOOM:REMove <DiagramName>, <ZoomName>
Removes the specified zoom diagram.
Setting parameters:
<DiagramName> Name of the diagram on which the zoom area is based.
<ZoomName> Name of the zoom diagram
Usage: Setting only
SCPI confirmed
16.2.7.5 XY-Diagram
WAVeform<m>:XYCurve:RATio......................................................................................509
WAVeform<m>:XYCurve:STATe.....................................................................................509
WAVeform<m>:XYCurve:SWAP......................................................................................510
WAVeform<m>:XYCurve:XSOurce..................................................................................510
WAVeform<m>:XYCurve:YSOurce..................................................................................510
WAVeform<m>:XYCurve:RATio <ConstantXYRatio>
If enabled, the x- and y-axes maintain a constant ratio in the diagram.
Suffix:
<m>
.
1...4
XY-diagram
Parameters:
<ConstantXYRatio> ON | OFF
*RST: ON
Usage: SCPI confirmed
WAVeform<m>:XYCurve:STATe <State>
Activates an XY-waveform.
Suffix:
<m>
.
1...4
XY-diagram
Command Reference