User manual

Remote Control
R&S
®
RTO
498User Manual 1316.0827.02 ─ 06
Parameters:
<State> ON | OFF
*RST: ON
DISPlay:SIGBar:POSition <Position>
The signal bar can be placed vertically at the right (default position) or at the left, or
horizontally at the top, bottom or center of the diagram to ensure best visibility of the
waveforms.
Parameters:
<Position> LEFT | RIGHt
*RST: RIGHt
DISPlay:
SIGBar:HIDE[:AUTO] <AutoHide>
If enabled, the signal bar disappears automatically after some time, similar to the Win-
dows task bar. With the commands DISPlay:SIGBar:HIDE:TIME and DISPlay:
SIGBar:HIDE:TRANsparency, you can define when and how the signal bar hides.
The signal bar reappears if you tap it, or if an action changes the content of the bar.
Parameters:
<AutoHide> ON | OFF
*RST: OFF
DISPlay:SIGBar:HIDE:TIME <AutoHideTime>
Sets the time when the signal bar is faded out if DISPlay:SIGBar:HIDE[:AUTO] is
"ON".
Parameters:
<AutoHideTime> Range: 0.03 to 86.4E+3
Increment: 0.5
*RST: 5
Default unit: s
DISPlay:SIGBar:HIDE:HEAD <HideHeadAlso>
If enabled, the "Auto hide" function hides also the horizontal and trigger label at the top
of the signal bar.
Parameters:
<HideHeadAlso> ON | OFF
*RST: ON
Command Reference