User manual

Remote Control
R&S
®
RTO
491User Manual 1316.0827.02 ─ 06
Usage: Event
TRIGger<m>:OUT:STATe <State>
Enables/disbales the trigger out signal that is provided to the EXT TRIGGER OUT con-
nector on the rear panel when a trigger occurs.
Suffix:
<m>
.
1..3
The suffix is irrelevant.
Parameters:
<State> ON | OFF
*RST: OFF
TRIGger<m>:OUT:POLarity <Polarity>
Sets the polarity of the trigger out pulse.
Suffix:
<m>
.
1..3
The suffix is irrelevant.
Parameters:
<Polarity> POSitive | NEGative
*RST: POSitive
TRIGger<m>:OUT:PLENgth <PulseLength>
Sets the length of the trigger out pulse.
Suffix:
<m>
.
1..3
The suffix is irrelevant.
Parameters:
<PulseLength> Range: 4E-9 to 1E-3
Increment: 20E-9
*RST: 100E-9
Default unit: s
TRIGger<m>:OUT:DELay?
Returns the delay of the first pulse edge to the trigger point.
Suffix:
<m>
.
1..3
The suffix is irrelevant.
Command Reference