User manual

Remote Control
R&S
®
RTO
475User Manual 1316.0827.02 ─ 06
Pattern Trigger
The pattern trigger is only available for the A-event (Suffix = 1).
TRIGger<m>:PATTern:MODE.........................................................................................475
TRIGger<m>:PATTern:TIMeout:MODE............................................................................475
TRIGger<m>:PATTern:TIMeout[:TIME]............................................................................476
TRIGger<m>:PATTern:WIDTh:RANGe............................................................................476
TRIGger<m>:PATTern:WIDTh[:WIDTh]............................................................................476
TRIGger<m>:PATTern:WIDTh:DELTa..............................................................................477
TRIGger<m>:PATTern:MODE <Mode>
Adds additional time limitation to the pattern definition.
Suffix:
<m>
.
1..3
1 = A-event only
Parameters:
<Mode> OFF | TIMeout | WIDTh
OFF
No time limitation. The event occurs if the pattern condition is ful-
filled.
TIMeout
Defines how long the result of the pattern condition must be true
or false. The duration of the timeout is defined using 
TRIGger<m>:PATTern:TIMeout[:TIME].
WIDTh
Defines a time range for keeping up the true result of the pattern
condition. The range is defined using TRIGger<m>:PATTern:
WIDTh:RANGe.
*RST:
OFF
TRIGger<m>:PATTern:TIMeout:MODE <TimeoutMode>
Defines the condition for the timeout.
Suffix:
<m>
.
1..3
1 = A-event only
Parameters:
<TimeoutMode> HIGH | LOW
HIGH
The result stays high.
LOW
The result stays low.
*RST: HIGH
Command Reference