User manual

Remote Control
R&S
®
RTO
467User Manual 1316.0827.02 ─ 06
Parameters:
<TimeRangeMode> WITHin | OUTSide | SHORter | LONGer
WITHin
Triggers if the signal stays inside or outside the vertical window
limits at least for the time Width - Delta and for Width + Delta at
the most.
OUTSide
"Outside" is the opposite definition of "Within". The instrument
triggers if the signal stays inside or outside the vertical window
limits for a time shorter than Width - Delta or longer than Width +
Delta.
SHORter
Triggers if the signal crosses vertical limits before the specified
"Width" time is reached.
LONGer
Triggers if the signal crosses vertical limits before the specified
"Width" time is reached.
*RST:
WITHin
TRIGger<m>:WINDow:WIDTh <Width>
For the ranges "Within" and "Outside" (defined using TRIGger<m>:WINDow:RANGe),
the width defines the center of a time range which is defined by the limits "±Delta" (see 
TRIGger<m>:WINDow:DELTa on page 467).
For the ranges "Shorter" and "Longer", it defines the maximum and minimum time lapse,
respectively.
Suffix:
<m>
.
1..3
Indicates the event in a trigger sequence: 1 = A-event, 2 = B-event,
3 = R-event.
Parameters:
<Width> Range: 100E-12 to 10000
Increment: 100E-9
*RST: 5E-9
Default unit: s
TRIGger<m>:WINDow:DELTa <WidthDelta>
Defines a range around the "Width" value specified using TRIGger<m>:WINDow:
WIDTh.
Suffix:
<m>
.
1..3
Indicates the event in a trigger sequence: 1 = A-event, 2 = B-event,
3 = R-event.
Command Reference