User manual

Remote Control
R&S
®
RTO
461User Manual 1316.0827.02 ─ 06
Width Trigger
The width trigger is not available for the B-event (Suffix = 2).
TRIGger<m>:WIDTh:POLarity.........................................................................................461
TRIGger<m>:WIDTh:RANGe..........................................................................................461
TRIGger<m>:WIDTh:WIDTh...........................................................................................462
TRIGger<m>:WIDTh:DELTa...........................................................................................462
TRIGger<m>:WIDTh:POLarity <Polarity>
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event, 3 = R-event.
Parameters:
<Polarity> POSitive | NEGative
See chapter 16.2.2.4, "Polarity Parameter", on page 420.
*RST: POSitive
TRIGger<m>:WIDTh:RANGe <RangeMode>
Defines how the range of a pulse width is defined in relation to the width and delta speci-
fied using TRIGger<m>:WIDTh:WIDTh and TRIGger<m>:WIDTh:DELTa, respec-
tively.
Suffix:
<m>
.
1..3
Indicates the event in a trigger sequence: 1 = A-event, 2 = B-event,
3 = R-event.
Parameters:
<RangeMode> WITHin | OUTSide | SHORter | LONGer
WITHin
Triggers on pulses inside a given range. The range is defined by
the width ±delta.
OUTSide
Triggers on pulses outside a given range. The range is defined by
the width ±delta.
SHORter
Triggers on pulses shorter than the given width.
LONGer
Triggers on pulses longer than the given width.
*RST:
WITHin
Command Reference