User manual

Remote Control
R&S
®
RTO
450User Manual 1316.0827.02 ─ 06
Parameters:
<FlashPath> String with the path and file name of the update package.
PROBe<m>:SERVice:FW:FLASh
Starts the update of the probe firmware.
Suffix:
<m>
.
1..4
Selects the input channel.
Usage: Event
PROBe<m>:
SERVice:STATe?
Queries the update status of the probe firmware.
See also: "Probe FW update" on page 48.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<ServiceState> MEASuring | UPDate | FAILed | UNKNown
*RST: UNKNown
Usage: Query only
16.2.5.7 Digital Filter
CHANnel<m>:DIGFilter:STATe.......................................................................................450
CHANnel<m>:DIGFilter:CUToff.......................................................................................450
TRIGger<m>:COUPling..................................................................................................451
TRIGger<m>:RFReject<n>.............................................................................................451
CHANnel<m>:DIGFilter:STATe <State>
Enables the DSP filter.
Suffix:
<m>
.
1..4
Selects the input channel.
Parameters:
<State> ON | OFF
*RST: OFF
CHANnel<m>:DIGFilter:CUToff <CutOffLP>
Sets the limit frequency of the Lowpass filter for input channels.
Command Reference