User manual

Remote Control
R&S
®
RTO
440User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
1..4
Selects the input channel.
Parameters:
<Overload> ON | OFF
Use OFF to reset the overload status bit.
*RST: OFF
Example:
CHANnel2:OVERload?
Queries the overload status of channel 2.
CHANnel2:OVERload OFF
Resets the overload status bit.
16.2.5.5
Waveform Data
To set the export data format, see FORMat[:DATA] on page 426.
CHANnel<m>[:WAVeform<n>]:DATA:HEADer..................................................................440
CHANnel<m>[:WAVeform<n>]:DATA[:VALues].................................................................441
CHANnel<m>[:WAVeform<n>]:DATA:HEADer?
Returns the header of channel waveform data.
Table 16-12: Header data
Position Meaning Example
1 XStart in s -9.477E-008 = - 94,77 ns
2 XStop in s 9.477E-008 = 94,77 ns
3 Record length of the waveform in Samples 200000
4 Number of values per sample interval. For most
waveforms the result is 1, for peak detect and enve-
lope waveforms it is 2.
1
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [WAVeform<n>] is omitted, waveform 1
is adressed.
Example:
CHAN1:WAV1:DATA:HEAD?
-9.477E-008,9.477E-008,200000,1
Usage: Query only
SCPI confirmed
Command Reference