User manual

Remote Control
R&S
®
RTO
436User Manual 1316.0827.02 ─ 06
Parameters:
<MaxAcquisitions> ON | OFF
ON
The maximum possible number of acquisitions in a series is used.
OFF
Acquires the number of acquisitions defined using ACQuire:
COUNt.
*RST: OFF
16.2.5.4
Vertical
CHANnel<m>:STATe.....................................................................................................436
CHANnel<m>:COUPling.................................................................................................436
CHANnel<m>:GND........................................................................................................437
CHANnel<m>:SCALe.....................................................................................................437
CHANnel<m>:RANGe....................................................................................................437
CHANnel<m>:POSition...................................................................................................438
CHANnel<m>:OFFSet....................................................................................................438
CHANnel<m>:BANDwidth...............................................................................................439
CHANnel<m>:IMPedance...............................................................................................439
CHANnel<m>:OVERload................................................................................................439
CHANnel<m>:STATe <State>
Switches the channel signal on or off.
Suffix:
<m>
.
1..4
Selects the input channel.
Parameters:
<State> ON | OFF
*RST: OFF
CHANnel<m>:COUPling <Coupling>
Selects the connection of the indicated channel signal.
Suffix:
<m>
.
1..4
Selects the input channel.
Command Reference