User manual

Remote Control
R&S
®
RTO
426User Manual 1316.0827.02 ─ 06
Usage: Query only
*TRG
TRiGger
Triggers all actions waiting for a trigger event. In particular, *TRG generates a manual
trigger signal (Manual Trigger). This common command complements the commands of
the TRIGger subsystem.
Usage: Event
*
TST?
self TeST query
Triggers selftests of the instrument and returns an error code in decimal form (see Service
Manual supplied with the instrument). "0" indicates no errors occured.
Usage:
Query only
*WAI
WAIt to continue
Prevents servicing of the subsequent commands until all preceding commands have
been executed and all signals have settled (see also command synchronization and 
*OPC).
Usage:
Event
16.2.4 General Remote Settings
This chapter describes commands that have effect on many other commands in different
applications of the instrument.
FORMat[:DATA].............................................................................................................426
FORMat:BPATtern.........................................................................................................427
SYSTem:LANGuage......................................................................................................427
FORMat[:DATA] <Format>, [<Length>]
Defines the format for data export with
● CHANnel<m>[:WAVeform<n>]:DATA[:VALues]
● CALCulate:MATH<m>:DATA[:VALues]
● REFCurve<m>:DATA[:VALues]
Command Reference