User manual

Remote Control
R&S
®
RTO
423User Manual 1316.0827.02 ─ 06
Usage: Setting only
*ESE <Value>
Event Status Enable
Sets the event status enable register to the specified value. The query returns the con-
tents of the event status enable register in decimal form.
Parameters:
<Value> Range: 0 to 255
*
ESR?
Event Status Read
Returns the contents of the event status register in decimal form and subsequently sets
the register to zero.
Return values:
<Contents> Range: 0 to 255
Usage: Query only
*IDN?
IDeNtification: returns the instrument identification.
Return values:
<ID> "Rohde&Schwarz,<device type>,<serial number>,<firmware ver-
sion>"
Example:
Rohde&Schwarz,RTO,1316.1000k14/200153,1.30.0.25
Usage: Query only
*IST?
Individual STatus query
Returns the contents of the IST flag in decimal form. The IST flag is the status bit which
is sent during a parallel poll.
Return values:
<ISTflag> 0 | 1
Usage: Query only
*OPC
OPeration Complete
Command Reference