User manual

Remote Control
R&S
®
RTO
419User Manual 1316.0827.02 ─ 06
16.2.2.1 Waveform Suffix
The numeric waveform suffix is used in REFLevel commands to indicate the source
waveform number from which the reference level is taken, and to assign color tables to
waveforms.
Depending on the command, not all suffix values are supported. For example, in REFLe-
vel commands, only suffixes 2...21 are allowed. The range of supported suffix numbers
ist indicated in the description of the individual commands.
Suffix 1
Suffix 1 means that no waveform is assigned. The first waveform C1W1 corresponds to
suffix number 2.
Waveform number Description
1 None
2...4 Channel 1 waveforms: C1W1, C1W2, C1W3
5...7 Channel 2waveforms: C2W1, C2W2, C2W3
8...10 Channel 3 waveforms: C3W1, C3W2, C3W3
11...13 Channel 4 waveforms: C4W1, C4W2, C4W3
14...17 Math waveforms: M1, M2, M3, M4
18...21 Reference waveforms: R1, R2, R3, R4
22...25 XY-waveforms: XY1, XY2, XY3, XY4
26...34 Measurement results: MRESult1, MRESult2, MRESult3, MRESult4, MRESult5,
MRESult6, MRESult7, MRESult8
34 = IMResult, result of immediate measurements available on Tektronix instru-
ments. Only relevant for Tektronix emulation (option R&S RTO-K301)
35...38 Serial buses: SBUS1, SBUS2, SBUS3, SBUS4
39...54
Digital channels: D0...D15 (option R&S RTO-B1)
55...58
Digital buses: MSO1, MSO2, MSO3, MSO4 (option R&S RTO-B1)
59 not used
16.2.2.2 Waveform Parameter
In many commands, one of the waveforms has to be specified as source. The table lists
all waveforms. For each command using a waveform parameter, the available waveforms
are specified.
Command Reference