User manual

Maintenance
R&S
®
RTO
387User Manual 1316.0827.02 ─ 06
The test might take several minutes. The summary result is shown in the "State" field.
In case you require support, you may be asked to provide this information.
15.6 Reference for Maintenance Settings
15.6.1 Board Detection/Maintenance
The "Board Detection/Maintenance" dialog box in the "File" menu provides service infor-
mation for your R&S RTO. In case you require support, you may be asked to provide this
information.
15.6.1.1 System Info
This tab provides general information on the hardware configuration, and indicates where
system information can be found on the instrument.
15.6.1.2 Mainboard
This tab provides information on the mainboard configuration in your instrument.
15.6.1.3 Frontend
This tab provides information on the frontend configuration in your instrument.
15.6.1.4 Frontpanel
This tab provides information on the frontpanel module installed in your instrument.
15.6.1.5 Service
This tab allows the service personnel to enter a password that activates further service
functions.
SCPI command: DIAGnostic:SERVice:PWD on page 771
15.6.2 Selftest
The instrument selftest checks the hardware for correct operation. Perform the selftest if
you suspect problems in hardware operation.
Reference for Maintenance Settings