User manual

Maintenance
R&S
®
RTO
385User Manual 1316.0827.02 ─ 06
15 Maintenance
The instrument does not need a periodic maintenance. Only the cleaning of the instru-
ment is essential.
To protect the front panel and to transport the instrument to another workplace safely and
easily, two accessories are provided:
● Soft case (R&S RTO-Z3, order number 1304.9118.02)
● Front cover (R&S RTO-Z1, order number 1304.9101.02)
Follow the instructions in the service manual and the safety instructions when exchanging
modules or ordering spares. The order no. for spare parts is included in the service man-
ual. The service manual includes further information particularly on troubleshooting,
repair, exchange of modules (including adjustment of the OCXO oscillator) and align-
ment.
The "Board Detection/Maintenance dialog" box provides further information on your par-
ticular instrument configuration which may be helpful in case you require support.
The addresses of Rohde & Schwarz support centers can be found at http://www.cus-
tomersupport.rohde-schwarz.com. A list of all service centers is available via http://
www.services.rohde-schwarz.com.
15.1 Cleaning
The outside of the instrument can be cleaned sufficiently using a soft, lint-free dust cloth.
Make sure that the air vents are not obstructed.
Shock hazard
Before cleaning the instrument, make sure that the instrument is switched off and dis-
connected from all power supplies.
Instrument damage caused by cleaning agents
Cleaning agents contain substances that may damage the instrument, e.g. cleaning
agents that contain a solvent may damage the front panel labeling or plastic parts.
Never use cleaning agents such as solvents (thinners, acetone, etc), acids, bases, or
other substances.
The outside of the instrument can be cleaned sufficiently using a soft, lint-free dust cloth.
Cleaning