User manual

Software and Network Operation
R&S
®
RTO
382User Manual 1316.0827.02 ─ 06
14.4.2.4 LAN Configuration
The LAN configuration consists of three parts:
●
"IP configuration" provides all mandatory LAN parameters.
●
"Advanced LAN Configuration" provides LAN settings that are not declared manda-
tory by the LXI standard.
●
"Ping Client" provides the ping utility to verify the connection between the instrument
and other devices.
IP Configuration
The "LAN Configuration > IP configuration" web page displays all mandatory LAN param-
eters and allows their modification.
The "TCP/IP Mode" configuration field controls how the IP address for the instrument
gets assigned (see also chapter 14.4.1.2, "Assigning the IP Address", on page 377). For
the manual configuration mode, the static IP address, subnet mask, and default gateway
are used to configure the LAN. The automatic configuration mode uses DHCP server or
Dynamic Link Local Addressing (Automatic IP) to obtain the instrument IP address.
Changing the LAN configuration is password-protected. The password is LxiWebIfc
(notice upper and lower case characters). This password cannot be changed in the cur-
rent firmware version.
Operation in a Network