User manual

Software and Network Operation
R&S
®
RTO
376User Manual 1316.0827.02 ─ 06
14.4 Operation in a Network
A LAN connection is the prerequisite for all network operations. The LAN connection
settings can be configured directly in the Windows operating system, or with LXI (LAN
eXtension for Instruments).
Remote operation
Remote monitoring and operation of the instrument from a connected computer is pos-
sible with a standard Web browser and the common cross-platform technology Virtual
Network Computing (VNC). You have to install the VNC server on the R&S RTO. Instal-
lation and configuration is described in the Application Note "Remote Monitoring and
Control of the R&S RTO with a Web Browser", available on the Rohde & Schwarz Internet.
The Remote Desktop Connection of the Windows operating system is not supported for
instrument control. It can be used for file transfer from and to the instrument.
14.4.1 Setting Up a Network (LAN) Connection
The R&S RTO is equipped with a network interface and can be connected to an Ethernet
LAN (local area network). Provided the appropriate rights have been assigned by the
network administrator and the Window XP firewall configuration is adapted accordingly,
the interface can be used, for example:
●
To transfer data between a controller and the tester, e.g. in order to run a remote
control program. See chapter "Remote Control"
●
To access or control the measurement from a remote computer using the "Remote
Desktop" application (or a similar tool)
●
To connect external network devices (e.g. printers)
●
To transfer data from a remote computer and back, e.g. using network folders
This section describes how to configure the LAN interface. It includes the following topics:
● chapter 14.4.1.1, "Connecting the Instrument to the Network", on page 377
● chapter 14.4.1.2, "Assigning the IP Address", on page 377
LXI
The R&S RTO complies with LXI Class C. LXI gives you direct access to the LAN settings
described below.
Operation in a Network