User manual

Software and Network Operation
R&S
®
RTO
373User Manual 1316.0827.02 ─ 06
To access Windows XP
► On the "File" menu, select "Minimize application".
The application is minimized to the task bar and the "Start" menu becomes available.
To access Windows XP using an external keyboard
► To open the "Start" menu, press the Windows key or the CTRL + ESC key combi-
nation on your keyboard.
To access the desktop, press the Windows key + D on your keyboard.
To access Windows XP settings directly
Important Windows XP settings can be accessed directly from the R&S RTO interface.
1. Press the SETUP key and tap the "System" tab.
2. Select one of the settings buttons to access the corresponding Windows dialog box.
Once you have opened a Windows dialog box, the task bar and the "Start" menu are
also available.
14.2 Firmware Update
The firmware on your R&S RTO may need to be updated in order to enable additional
new features or if reasons for improvement come up. Ask your sales representative or
check the Rohde&Schwarz website for availability of firmware updates. A firmware
update package includes at least a setup file and release notes.
Before updating the firmware on your instrument, read the release notes delivered with
the firmware version.
1. Download the update package from the Rohde&Schwarz website and store it on a
memory stick, on the instrument, or on a server network drive that can be accessed
by the instrument.
2.
NOTICE! Stop acquisition. The firmware update must not be performed during run-
ning acquisition.
If an acquisition is running, stop it by pressing RUN CONT or RUN N×SINGLE.
3. Press the SETUP key, or tap "Setup" on the "File" menu.
4. Select the "System" tab.
Firmware Update