User manual

General Instrument Setup
R&S
®
RTO
365User Manual 1316.0827.02 ─ 06
13.2.1.3 SW Options
This tab provides information on installed software options and functions to install new
options via license keys.
The "State" of the option indicates whether the installed option is an official or merely a
beta-release version. Beta-release versions must be activated explicitely in the "Mode"
dialog box (see chapter 14.3.1, "Mode", on page 375).
Option list
Indicates the installed options. The information provided in the "Option list" is for admin-
istration and troubleshooting purposes only. Should you require support for the option,
provide this information to the service representative.
Material number, Serial number
Indicates the material number and serial number of your instrument. These numbers are
required to order a new option.
SCPI command:
DIAGnostic:SERVice:PARTnumber on page 769
DIAGnostic:SERVice:SERialnumber on page 769
Enter new option key
For each option you order an option key is provided. Enter the option key here to activate
the option.
Reference for General Instrument Settings