User manual

General Instrument Setup
R&S
®
RTO
361User Manual 1316.0827.02 ─ 06
Firmware version
Indicates the firmware version currently installed on the instrument.
SCPI command:
DIAGnostic:SERVice:FWVersion on page 768
Bios version
Indicates the bios version currently installed on the instrument.
Image version
Indicates the image version currently installed on the instrument.
Desktop (minimize all)
Minimizes all displayed application windows on the instrument, so that the desktop
becomes visible on the screen to access the Windows functionality.
This function is also available from the "File" menu.
Computer name, IP Address, DHCP
Indicates the currently defined computer name, the defined IP address and DHCP
address enabling. These values are required to configure the instrument for work in a
network.
NOTICE! Risk of network problems. All parameters can be edited here; however, beware
that changing the computer name has major effects in a network. For details, see chap-
ter 14.4.1, "Setting Up a Network (LAN) Connection", on page 376.
SCPI command:
DIAGnostic:SERVice:COMPutername on page 768
Reference for General Instrument Settings