User manual

Data and Results Management
R&S
®
RTO
359User Manual 1316.0827.02 ─ 06
Update image
Updates the preview of the print image with the current display view, e.g. after changes
to the settings have been made or an additional channel has been activated.
Inverse color
Inverts the colors of the output, i.e. a dark waveform is printed on a white background.
SCPI command:
HCOPy:DEVice<m>:INVerse on page 765
Edit image
Opens a temporary file with the current print image in a graphic editor. There you can
edit the image. Save and print the image, or use "Save as" to set the file name and storage
location. The changes are not shown in the preview.
Print
Prints the current print image together with saved editing changes on the selected 
Printer.
If the printer is configured to print to a file, "Print" is an alternative of "Save image to
file".
SCPI command:
HCOPy:DESTination<1..2> on page 763
HCOPy:IMMediate<m>[:DUM] on page 766
HCOPy:IMMediate<m>:NEXT on page 766
Save image to file
Defines the file name if the print image is saved. By default, the file name has the prefix
"RTOSCreenshot_".
Double-tap the file name to open the file selection dialog box.
SCPI command:
HCOPy:DEVice<m>:LANGuage on page 764
HCOPy:DESTination<1..2> on page 763
MMEMory:NAME on page 764
Save ← Save image to file
Saves the current print image to the specified file name.
SCPI command:
HCOPy:IMMediate<m>[:DUM] on page 766
HCOPy:IMMediate<m>:NEXT on page 766
Save As... ← Save image to file
Opens the file selection dialog box and saves the current print image to the selected file
name.
Delete ← Save image to file
Opens the file selection dialog box and deletes the selected file.
SCPI command:
MMEMory:DELete on page 757
Reference for PRINT Settings