User manual

Data and Results Management
R&S
®
RTO
355User Manual 1316.0827.02 ─ 06
12.2.3 User-defined Preset
A user-defined preset contains the complete instrument setup including display settings,
except for transparency and intensity. You can save the current configuration to a preset
file, and load a previously saved preset file. You can then specify that these settings are
to be applied, in addition to the standard instrument settings, with the PRESET function.
Save to or load from file
The file name with extension .dfl to load or to save the settings to.
For details, see the Save to or load from file function in the "Settings" tab.
Enable user-defined preset
If enabled, the settings from the selected preset file are restored when the PRESET key
is pressed.
If disabled, PRESET sets the instrument to the factory defaults.
Factory defaults
Resets the instrument to the factory default settings.
12.2.4 File Selection Dialog
The file selection dialog provides a file explorer from which you can select a file to load
or to save data to.
Reference for FILE Settings