User manual

Data and Results Management
R&S
®
RTO
351User Manual 1316.0827.02 ─ 06
"Save As..."
Opens the file selection dialog box and saves the data to the selected
file.
".dfl/.xml"
Selects the file format.
"Delete"
Deletes the selected file.
Quick savesets
A saveset stores the current measurement and instrument settings at the touch of a but-
ton, and reloads them in the same way. Three savesets are available for the most fre-
quently used measurement.
Savesets are stored automatically with standard names, so it is useful to describe the
settings in a comment.
Save ← Quick savesets
Saves the current measurement and instrument settings to one of the three savesets.
Recall ← Quick savesets
Loads the instrument settings from one of the three savesets.
Comment ← Quick savesets
Double-tap the edit field to describe the settings saved in the selected saveset.
Clear ← Quick savesets
Deletes the selected saveset.
12.2.1.2 User Preferences
In this tab, the storage settings for user-specific display settings (diagram layout, toolbar,
and transparency settings) are defined. By default, these file names have the prefix
"UserPreferences_".
Save to or load from file
The file name to load or to save the data to.
By default, user preference file names have the prefix "UserPreferences_".
For details, see the Save to or load from file function in the "Settings" tab.
12.2.1.3 Waveforms
In this tab, the storage settings for waveform data are defined.
Reference for FILE Settings