User manual

Data and Results Management
R&S
®
RTO
349User Manual 1316.0827.02 ─ 06
12.1.5 Defining Default File Paths and Names
When a save or load operation is performed, a default file name and path is provided.
You can configure which path is used and how the file name is generated. In the file
selection dialog box you can change the folder and name as desired.
To define the default file path
1. Press the FILE key.
2. Select the "Save/Recall" tab.
3. Select the "Settings" tab.
4. Double-tap the "Default path for all file operations" field.
The directory selection dialog box is opened.
5. Select the folder in which the data is to be stored by default.
6. To restore the factory-set default path, tap "Reset" next to the path field.
To define the automatic file name pattern
The automatic file name pattern can consist of the following elements:
<Prefix>_<UserText>_<Date>_<Index>_<Time>
The prefix depends on the data type to be stored and cannot be changed by the user.
The other elements can be enabled or disabled as required.
1. Press the FILE key.
2. Select the "Autonaming" tab.
3. To insert a user-defined text after the prefix, enter the text in the edit field.
4. To insert the current date, time or an index (serial number), enable the corresponding
option.
The specified elements are used to generate the default file name for the next storage
operation.
12.2 Reference for FILE Settings
The FILE key provides functions for saving and restoring data on the instrument. The
following types of data can be saved and loaded:
●
Instrument and measurement settings
●
User-specific display settings
●
Waveform data
●
Preset values
A naming pattern is availabe and can be adjusted to simplify a clear data storage.
Reference for FILE Settings