User manual

Protocol Analysis
R&S
®
RTO
307User Manual 1316.0827.02 ─ 06
SCPI command
● BUS<m>:CAN:FRAMe<n>:TRANslation on page 700
10.7
FlexRay (Option R&S RTO-K4)
FlexRay is designed for use in safety-related distributed applications in the automotive
industry. It is applied in real-time applications when higher data rates and reliable com-
munication are required. In particular, FlexRay supports x-by-wire applications, for exam-
ple, steer-by-wire or brake-by-wire.
10.7.1 Reference for FlexRay
10.7.1.1 FlexRay Configuration
Make sure that the tab of the correct serial bus is selected on the left side.
See also: chapter 10.1.1, "Configuration - General Settings", on page 251.
FlexRay (Option R&S RTO-K4)