User manual
Protocol Analysis
R&S
®
RTO
268User Manual 1316.0827.02 ─ 06
●
"ID Value": decimal address value
●
"ID Name": symbolic label, name of the bus node, specifiing its function in the bus
network. The name can be changed in the table.
If "Translation" is enabled, the names ares visible in the "Decode results" table and
in the display of the decoded signal.
For general information on the "Translation" tab, see chapter 10.1.3, "Protocol Translation
Tables", on page 253.
Example: I
2
C translation file
# ----------------------------------------------------------------------------
# PROTOCOL TRANSLATION TABLE
# ---- Format information for I2C ----
# Column order and content:
# ID Type(7,10), ID Value (address, integer), ID Name (label, string)
# ----------------------------------------------------------------------------
# Copyright: (c) 2011 Rohde & Schwarz GmbH & CO KG.
# All rights reserved.
# Muehldorfstr. 15, D-81671 Munich, Germany
# ----------------------------------------------------------------------------
#
@FILE_VERSION = 1.0
@PROTOCOL_NAME = i2c
# ----------------------------------------------------------------------------
#
# ----Definition----
# ID as hex
I²C