User manual

Search Functions
R&S
®
RTO
248User Manual 1316.0827.02 ─ 06
Position / Relative position ← Search zoom window
Defines the y-value of the centerpoint of the zoom area.
SCPI command:
LAYout:ZOOM:VERTical:ABSolute:POSition on page 506
LAYout:ZOOM:VERTical:RELative:POSition on page 507
SEARch:RESDiagram:VERT:ABSolute:POSition on page 638
SEARch:RESDiagram:VERT:RELative:POSition on page 639
Range / Relative Range ← Search zoom window
Defines the height of the zoom area.
SCPI command:
LAYout:ZOOM:VERTical:RELative:SPAN on page 508
LAYout:ZOOM:VERTical:ABSolute:SPAN on page 507
SEARch:RESDiagram:VERT:ABSolute:SPAN on page 638
SEARch:RESDiagram:VERT:RELative:SPAN on page 639
Horizontal mode ← Search zoom window
Defines whether absolute or relative values are used to specify the x-axis values.
SCPI command:
LAYout:ZOOM:HORZ:MODE on page 503
SEARch:RESDiagram:HORZ:MODE on page 637
Position / Relative position ← Search zoom window
Defines the x-value of the centerpoint of the zoom area.
SCPI command:
LAYout:ZOOM:HORZ:ABSolute:POSition on page 503
LAYout:ZOOM:HORZ:RELative:POSition on page 505
Range / Relative Range ← Search zoom window
Defines the width of the zoom area.
SCPI command:
LAYout:ZOOM:HORZ:ABSolute:SPAN on page 504
LAYout:ZOOM:HORZ:RELative:SPAN on page 505
SEARch:RESDiagram:HORZ:ABSolute:SPAN on page 636
SEARch:RESDiagram:HORZ:RELative:SPAN on page 637
9.3.4 Noise Reject
You can reject noise by setting a hysteresis in order to avoid finding trigger events caused
by noise oscillation around the trigger level.
You can select the hysteresis mode and value for each input channel, math and reference
waveform.
The noise reject settings are similar to those for triggers, see also chapter 3.3.3, "Noise
Reject", on page 79.
Reference for Search Settings