Manualshelf

User manual

ManualsBrandsDigi-Frame ManualsComputer equipmentDF-1044r
251252253254255256257258259260
Search Functions
R&S
®
RTO
240User Manual 1316.0827.02 ─ 06
To move the position of the search results display
By default, the "Search Results" box is displayed in front of the other diagrams. Alterna-
tively, you can display it in its own area on the screen, like another diagram. For details
see "Working with Waveforms" in the "Getting Started" manual.
1. Minimize the initial result box.
2. Drag the result icon from the signal bar to the diagram area and drop it in its dedicated
target area, as you would a waveform.
The search results are displayed in a table in the specified area of the screen.
3. To minimize the result box again, select the label of the result area and drag it towards
the signal bar. The result box is replaced by a result icon.
4. To delete the result box, tap the "Delete" icon and then the result box or result icon.
This also deletes the settings of the search.
To configure the result tables
1. Press the SEARCH key to open the "Search" dialog box.
2. Select the tab for the search you want to configure.
3. Select the "Result Presentation" tab.
4. Select "Show result table" to display the "Search Results" box.
5. Select the sort mode of the result table.
6. By default, the results are listed in descending order, i.e. the largest value at the top.
To change the sorting direction, enable "Sort ascending".
7. Define a maximum number of results to be displayed in the result table in the "Max
result count" field.
To display search zoom windows
1. In the "Search" dialog box, in the "Result Presentation" tab, select "Show search
zoom windows".
2.
Configure the zoom area for all search results as described in "To define the zoom
area numerically using position and range values" on page 105.
3. Perform a search.
A zoom window is displayed for the currently selected search result. Directly after a
search this is the last result that was found. You can switch between results in the
result table by selecting the result index to move the zoom window to each one.
Configuring and Performing Searches