User manual

Mask Testing
R&S
®
RTO
235User Manual 1316.0827.02 ─ 06
Reset
Clears all totals and results in all "Mask Test" result boxes.
SCPI command:
MTESt:RST on page 598
8.3.4 Mask Display
The "Mask Display" tab contains all settings for mask and hit display.
Show mask
Switches the display of all mask segments on or off.
Waveform style
See: "Style" on page 95.
Highlight hits
If selected, the mask hits are highlighted on the screen. You can define the color and the
time of the hit display.
Infinite highlight
If selected, the mask hits are highlighted for an unlimited period of time.
Highlight time
Sets the time how long the mask hits are highlighted.
Color
Sets the color of samples that violated the mask.
Mask without violation
Sets the color of masks segments that were not hit.
Mask with violation
Sets the color of mask segments the signal has entered into.
Mask with contact
Sets the color of masks segments that were touched at the border. In this case, the
resolution is not sufficient to detect if the mask was really hit or not. Zoom into the con-
cerned area to see the actual result.
Reference for Masks