User manual

Mask Testing
R&S
®
RTO
233User Manual 1316.0827.02 ─ 06
Fig. 8-3: Waveform mask with vertical width = 0.5 div, vertical position = -0.5 div, vertical stretch = 110%
SCPI command:
MTESt:WFMRescale:YSTRetch on page 607
Vertical position
Moves the mask vertically within the display.
Fig. 8-4: Waveform mask with vertical width = 0.5 div and vertical position = -0.5 div
SCPI command:
MTESt:WFMRescale:YPOSition on page 607
Reference waveform: save to or load from file
Loads the waveform from the selected file to the "Reference" and creates the mask
immediately.
See also: "Save to or load from file" on page 211.
8.3.3 Event Actions /Reset
The settings in this tab define what happens when the mask test has failed or when it has
passed successfully. Each action can be initiated either on failure or on success.
Furthermore, you can reset all totals and results in the "Mask Test" result boxes.
Reference for Masks