User manual

Mask Testing
R&S
®
RTO
230User Manual 1316.0827.02 ─ 06
To take effect, tap "Recalculate".
SCPI command:
MTESt:SEGMent:RESCale:YFACtor on page 604
Recalculate ← Rescale
Multiplies and adds the given x- and y-factors and offsets to the coordinates of all points
of the selected mask segment.
SCPI command:
MTESt:SEGMent:RESCale:RECalculate on page 604
8.3.2.2 Mask Definition: Waveform Mask
A waveform mask is created from an existing waveform. The envelope of the waveform
builds the upper and lower limit line of the mask, and the limits are moved and stretched.
The result is a tolerance tube around the waveform that is used as mask.
The source for a waveform mask is a reference waveform. The reference waveform can
be defined before mask definition, or loaded from a file, or it is created from the waveform
to be tested. In the latter case, the waveform arithmetic of the waveform must be set to
"Envelope".
Settings overview:
Reference for Masks