User manual

Mask Testing
R&S
®
RTO
219User Manual 1316.0827.02 ─ 06
2. Tap the "Masks" icon on the toolbar.
3. Tap the corner points of the new mask segment on the touch screen.
4. To finish the segment and mask definition, double-tap the last point, or tap the
"Select" icon on the toolbar.
To delete a mask segment on the touch screen
1. On the toolbar, tap the "Delete" icon.
2. Tap the mask segment to be deleted.
To delete a point on the touch screen
1. Tap the mask segment from which you want to delete a point.
The selected segment is now in definition mode, shown with blue color.
2. On the toolbar, tap the "Delete" icon.
3. Tap the point to be deleted.
To move a segment on the touch screen
1. Drag&drop the segment to the new position.
2. Tap outside the mask to deselect the mask segment.
To move a point on the touch screen
1. Tap the mask segment to be changed.
2. Drag&drop the point to the new position.
3. Tap outside the mask to deselect the mask segment.
To change the mask definition numerically
The settings mentioned here are described in detail in chapter 8.3.2.1, "Mask Definition:
User Mask", on page 227.
1. Press the MASKS key on the front panel.
Working with Masks