User manual

Reference Waveforms
R&S
®
RTO
211User Manual 1316.0827.02 ─ 06
Save to or load from file
Enter the file name of the stored reference waveform and select the file format with the
format button on the right. Double-tap the file name to open the file selection dialog box,
see also chapter 12.2.4, "File Selection Dialog", on page 355.
By default, the file name has the prefix "RefCurves_". You can define a pattern for auto-
matic naming in the "Autonaming" tab.
Note: Note that reference waveforms can be loaded from .bin files only. xml and csv
formats are meant for further processing in other applications.
"Load"
Loads the specified reference waveform.
"Open"
Opens a file selection dialog box and loads the selected reference
waveform file
"Save"
Saves the waveform as a reference waveform in the selected file.
"Save As..."
Opens the file selection dialog box and saves the waveform to the
selected file.
".bin/.xml/.csv"
Selects the file format.
SCPI command:
REFCurve<m>:OPEN on page 591
REFCurve<m>:SAVE on page 591
REFCurve<m>:DELete on page 592
7.2.2 Scaling
A reference waveform can have its own settings, for example, vertical position und scale.
Additionally, it can be stretched or compressed in vertical and horizontal direction. The
current settings and the settings of the source waveform are stored.
Vertical Scaling
Selects the type of vertical settings:
"Coupled to
source"
Vertical position and scale of the source are used.
Reference Waveforms