User manual

Measurements
R&S
®
RTO
175User Manual 1316.0827.02 ─ 06
Vertical offset
Defines a vertical offset for the long term measurement and the statistics histogram.
SCPI command:
MEASurement<m>:VERTical:OFFSet on page 568
Enable histogram
Displays a histogram of the statistical results. Enabling the histogram enables also the
calculation and display of statistics for the measurement results if statistics were disabled.
the histogram shows the cumulative occurence distribution of mean measurement results
in a graphic.
SCPI command:
MEASurement<m>:STATistics:HISTogram on page 566
Statistics
Enables the calculation and display of statistics for the measurement results.
SCPI command:
MEASurement<m>:STATistics[:ENABle] on page 566
MEASurement<m>:RESult:AVG on page 570
MEASurement<m>:RESult:EVTCount on page 570
MEASurement<m>:RESult:NPEak on page 570
MEASurement<m>:RESult:PPEak on page 570
MEASurement<m>:RESult:RMS on page 570
MEASurement<m>:RESult:STDDev on page 571
MEASurement<m>:RESult:WFMCount on page 571
MEASurement<m>:RESult[:ACTual] on page 570
Reset statistics mode
Defines when the statistics for long term measurements are reset.
"None"
No reset, the number of measurements considered by the statistics is
not limited.
"Time"
Resets the statistics after the time defined in "Reset time/period".
"Waveforms"
Resets the statistics after a number of measurements defined in "Reset
count".
SCPI command:
MEASurement<m>:STATistics:MODE on page 566
Reset now
Resets the statistics.
SCPI command:
MEASurement<m>:STATistics:RESet on page 567
Reset time/period
Defines the time or period after which the statistics are reset.
SCPI command:
MEASurement<m>:STATistics:RTIMe on page 567
Automatic Measurements