User manual

Measurements
R&S
®
RTO
171User Manual 1316.0827.02 ─ 06
Meas 1/2/3/4/5/6/7/8
Selects one of the eight available measurements.
Use gate
Considers the gating settings of the source waveform for the measurement.
SCPI command:
MEASurement<m>:GATE[:STATe] on page 572
Show gate
Displays the gate area in the source diagram.
SCPI command:
CALCulate:MATH<m>:FFT:GATE:SHOW on page 585
MEASurement<m>:GATE:SHOW on page 573
SEARch:GATE:SHOW on page 633
Gate definition
Defines the gate settings for measurement gating.
Zoom coupling ← Gate definition
If enabled, the gate area is defined identically to the zoom area. If several zoom diagrams
are defined, select the zoom diagram to be used for gating. The "Start" and "Stop" values
of the gate are adjusted accordingly.
Automatic Measurements