User manual

Measurements
R&S
®
RTO
170User Manual 1316.0827.02 ─ 06
"All off"
Deactivates all selected measurements in the table.
SCPI command:
MEASurement<m>:ADDitional on page 525
Probability domain marker reference
Defines the marker reference in the probability domain.
"Peak"
The y-value with the maximum sample value in the histogram
"Upper Peak"
The y-value at the maximum sample value in the upper half of the his-
togram
"Lower Peak"
The y-value at the maximum sample value in the lower half of the his-
togram
"Maximum"
The highest y-value with a probability > 0
"Minimum"
The lowest y-value with a probability > 0
"Median"
The y-value for which half the samples lie above, the other half below
in the histogram
"Mean"
The weighted arithmetic average of the histogram
SCPI command:
MEASurement<m>:HISTogram:PROBability:TYPE on page 562
Delta
Defines a range around the marker.
SCPI command:
MEASurement<m>:HISTogram:PROBability:LIMit on page 562
5.2.3.7 Measurements - Gate/Display Tab
The settings on this tab define the measurement gate and the display of results.
Automatic Measurements