User manual

Measurements
R&S
®
RTO
152User Manual 1316.0827.02 ─ 06
5. For averaging operations, define how many statistics values are used to calculate
the average.
6. Tap the "Enable Statistics" icon to include statistics in the measurement results.
As soon as the long-term measurement is performed, the statistics are compiled until
the measurement is stopped. If configured, the results are reset each time the reset
period or reset count is reached. The results are displayed in the measurement result
box.
5.2.2.10 Using Environment Sensors
Environment sensors can provide additional information during a measurement, e.g. the
temperature. The sensor results are displayed as a background color in the measurement
diagram. Thus, the influence of temperature or humidity changes on the measurement
results is visible directly.
1. On the "Meas" menu, select "Long Term/Statistics".
2. Select the tab for the measurement you want to combine with environment values.
3. Tap the "Use sensor" icon to enable the sensor measurement.
4. Below, select one of the connected environment sensors.
5. On the lower list, select temperature or humidity for evaluation.
6. Tap the "Setup sensor" button or select the "Sensors" tab to set up the sensor result
display.
7. Select the tab for the sensor you want to configure.
8. Select the color table to be used with "Color table reference".
9. Enter the "Minimum value (0%)" and "Maximum value (100%)" to set the range of
values displayed by a background color.
10.
If necessary, edit the color table or create a new one as described in chapter 4.1.2.1,
"Editing Waveform Colors", on page 89.
The background of the measurement diagram is colored according to the assigned
color table.
5.2.3 Reference for Automatic Measurements
Automatic measurements are configured in the "Measurements" dialog box, which is
opened via the "Meas > Setup" menu or via the "Measurements" result box, or by pressing
the MEAS key. Up to 8 measurement waveforms can be defined. Each measurement
waveform is configured in its own tab.
● Reference Level Settings......................................................................................153
● Measurements Setup - General Settings..............................................................158
● Measurements Setup - Amplitude/Time ...............................................................161
● Measurements Setup - Eye/Jitter .........................................................................166
Automatic Measurements